diff --git a/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/core/stage_1_boot.cpp b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/core/stage_1_boot.cpp
new file mode 100644
index 0000000000000000000000000000000000000000..2291479ed86a7c7904b73fffc7f5baca930c5157
--- /dev/null
+++ b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/core/stage_1_boot.cpp
@@ -0,0 +1,479 @@
+#include <string.h>
+
+#include "core/cache_cortexMx.h"
+#include "core/interrupts.h" //For the unexpected interrupt call
+#include "core/interrupts_cortexMx.h"
+#include "interfaces/arch_registers.h"
+#include "interfaces/bsp.h"
+#include "kernel/stage_2_boot.h"
+
+/*
+ * startup.cpp
+ * STM32 C++ startup.
+ * NOTE: for stm32f767 devices ONLY.
+ * Supports interrupt handlers in C++ without extern "C"
+ * Developed by Terraneo Federico, based on ST startup code.
+ * Additionally modified to boot Miosix.
+ */
+
+/**
+ * Called by Reset_Handler, performs initialization and calls main.
+ * Never returns.
+ */
+void program_startup() __attribute__((noreturn));
+void program_startup()
+{
+ //Cortex M7 core appears to get out of reset with interrupts already enabled
+ __disable_irq();
+
+ miosix::IRQconfigureCache((const unsigned int*)0xd0000000, 8 * 1024 * 1024);
+
+ // These are defined in the linker script
+ extern unsigned char _etext asm("_etext");
+ extern unsigned char _data asm("_data");
+ extern unsigned char _edata asm("_edata");
+ extern unsigned char _bss_start asm("_bss_start");
+ extern unsigned char _bss_end asm("_bss_end");
+
+ // Initialize .data section, clear .bss section
+ unsigned char *etext=&_etext;
+ unsigned char *data=&_data;
+ unsigned char *edata=&_edata;
+ unsigned char *bss_start=&_bss_start;
+ unsigned char *bss_end=&_bss_end;
+ memcpy(data, etext, edata-data);
+ memset(bss_start, 0, bss_end-bss_start);
+
+ // Move on to stage 2
+ _init();
+
+ // If main returns, reboot
+ NVIC_SystemReset();
+ for(;;) ;
+}
+
+/**
+ * Reset handler, called by hardware immediately after reset
+ */
+void Reset_Handler() __attribute__((__interrupt__, noreturn));
+void Reset_Handler()
+{
+ /**
+ * SystemInit() is called *before* initializing .data and zeroing .bss
+ * Despite all startup files provided by ST do the opposite, there are three
+ * good reasons to do so:
+ * 1. First, the CMSIS specifications say that SystemInit() must not access
+ * global variables, so it is actually possible to call it before
+ * 2. Second, when running Miosix with the xram linker scripts .data and
+ * .bss are placed in the external RAM, so we *must* call SystemInit(),
+ * which enables xram, before touching .data and .bss
+ * 3. Third, this is a performance improvement since the loops that
+ * initialize .data and zeros .bss now run with the CPU at full speed
+ * instead of 8MHz
+ */
+ SystemInit();
+
+ /**
+ * ST does not provide code to initialize the SDRAM at boot.
+ * Put after SystemInit() as SDRAM is timing-sensitive and needs the full
+ * clock speed.
+ */
+ #ifdef __ENABLE_XRAM
+ miosix::configureSdram();
+ #endif //__ENABLE_XRAM
+
+ /*
+ * Load into the program stack pointer the heap end address and switch from
+ * the msp to sps.
+ * This is required for booting Miosix, a small portion of the top of the
+ * heap area will be used as stack until the first thread starts. After,
+ * this stack will be abandoned and the process stack will point to the
+ * current thread's stack.
+ */
+ asm volatile(
+ "ldr r0, =_heap_end \n\t"
+ "msr psp, r0 \n\t"
+ "movw r0, #2 \n\n" // Set the control register to use
+ "msr control, r0 \n\t" // the process stack
+ "isb \n\t":::"r0");
+
+ program_startup();
+}
+
+/**
+ * All unused interrupts call this function.
+ */
+extern "C" void Default_Handler() { unexpectedInterrupt(); }
+
+// System handlers
+void /*__attribute__((weak))*/ Reset_Handler(); // These interrupts are not
+void /*__attribute__((weak))*/ NMI_Handler(); // weak because they are
+void /*__attribute__((weak))*/ HardFault_Handler(); // surely defined by Miosix
+void /*__attribute__((weak))*/ MemManage_Handler();
+void /*__attribute__((weak))*/ BusFault_Handler();
+void /*__attribute__((weak))*/ UsageFault_Handler();
+void /*__attribute__((weak))*/ SVC_Handler();
+void /*__attribute__((weak))*/ DebugMon_Handler();
+void /*__attribute__((weak))*/ PendSV_Handler();
+void /*__attribute__((weak))*/ SysTick_Handler();
+
+// Interrupt handlers
+void __attribute__((weak)) WWDG_IRQHandler();
+void __attribute__((weak)) PVD_IRQHandler();
+void __attribute__((weak)) TAMP_STAMP_IRQHandler();
+void __attribute__((weak)) RTC_WKUP_IRQHandler();
+void __attribute__((weak)) FLASH_IRQHandler();
+void __attribute__((weak)) RCC_IRQHandler();
+void __attribute__((weak)) EXTI0_IRQHandler();
+void __attribute__((weak)) EXTI1_IRQHandler();
+void __attribute__((weak)) EXTI2_IRQHandler();
+void __attribute__((weak)) EXTI3_IRQHandler();
+void __attribute__((weak)) EXTI4_IRQHandler();
+void __attribute__((weak)) DMA1_Stream0_IRQHandler();
+void __attribute__((weak)) DMA1_Stream1_IRQHandler();
+void __attribute__((weak)) DMA1_Stream2_IRQHandler();
+void __attribute__((weak)) DMA1_Stream3_IRQHandler();
+void __attribute__((weak)) DMA1_Stream4_IRQHandler();
+void __attribute__((weak)) DMA1_Stream5_IRQHandler();
+void __attribute__((weak)) DMA1_Stream6_IRQHandler();
+void __attribute__((weak)) ADC_IRQHandler();
+void __attribute__((weak)) CAN1_TX_IRQHandler();
+void __attribute__((weak)) CAN1_RX0_IRQHandler();
+void __attribute__((weak)) CAN1_RX1_IRQHandler();
+void __attribute__((weak)) CAN1_SCE_IRQHandler();
+void __attribute__((weak)) EXTI9_5_IRQHandler();
+void __attribute__((weak)) TIM1_BRK_TIM9_IRQHandler();
+void __attribute__((weak)) TIM1_UP_TIM10_IRQHandler();
+void __attribute__((weak)) TIM1_TRG_COM_TIM11_IRQHandler();
+void __attribute__((weak)) TIM1_CC_IRQHandler();
+void __attribute__((weak)) TIM2_IRQHandler();
+void __attribute__((weak)) TIM3_IRQHandler();
+void __attribute__((weak)) TIM4_IRQHandler();
+void __attribute__((weak)) I2C1_EV_IRQHandler();
+void __attribute__((weak)) I2C1_ER_IRQHandler();
+void __attribute__((weak)) I2C2_EV_IRQHandler();
+void __attribute__((weak)) I2C2_ER_IRQHandler();
+void __attribute__((weak)) SPI1_IRQHandler();
+void __attribute__((weak)) SPI2_IRQHandler();
+void __attribute__((weak)) USART1_IRQHandler();
+void __attribute__((weak)) USART2_IRQHandler();
+void __attribute__((weak)) USART3_IRQHandler();
+void __attribute__((weak)) EXTI15_10_IRQHandler();
+void __attribute__((weak)) RTC_Alarm_IRQHandler();
+void __attribute__((weak)) OTG_FS_WKUP_IRQHandler();
+void __attribute__((weak)) TIM8_BRK_TIM12_IRQHandler();
+void __attribute__((weak)) TIM8_UP_TIM13_IRQHandler();
+void __attribute__((weak)) TIM8_TRG_COM_TIM14_IRQHandler();
+void __attribute__((weak)) TIM8_CC_IRQHandler();
+void __attribute__((weak)) DMA1_Stream7_IRQHandler();
+void __attribute__((weak)) FMC_IRQHandler();
+void __attribute__((weak)) SDMMC1_IRQHandler();
+void __attribute__((weak)) TIM5_IRQHandler();
+void __attribute__((weak)) SPI3_IRQHandler();
+void __attribute__((weak)) UART4_IRQHandler();
+void __attribute__((weak)) UART5_IRQHandler();
+void __attribute__((weak)) TIM6_DAC_IRQHandler();
+void __attribute__((weak)) TIM7_IRQHandler();
+void __attribute__((weak)) DMA2_Stream0_IRQHandler();
+void __attribute__((weak)) DMA2_Stream1_IRQHandler();
+void __attribute__((weak)) DMA2_Stream2_IRQHandler();
+void __attribute__((weak)) DMA2_Stream3_IRQHandler();
+void __attribute__((weak)) DMA2_Stream4_IRQHandler();
+void __attribute__((weak)) ETH_IRQHandler();
+void __attribute__((weak)) ETH_WKUP_IRQHandler();
+void __attribute__((weak)) CAN2_TX_IRQHandler();
+void __attribute__((weak)) CAN2_RX0_IRQHandler();
+void __attribute__((weak)) CAN2_RX1_IRQHandler();
+void __attribute__((weak)) CAN2_SCE_IRQHandler();
+void __attribute__((weak)) OTG_FS_IRQHandler();
+void __attribute__((weak)) DMA2_Stream5_IRQHandler();
+void __attribute__((weak)) DMA2_Stream6_IRQHandler();
+void __attribute__((weak)) DMA2_Stream7_IRQHandler();
+void __attribute__((weak)) USART6_IRQHandler();
+void __attribute__((weak)) I2C3_EV_IRQHandler();
+void __attribute__((weak)) I2C3_ER_IRQHandler();
+void __attribute__((weak)) OTG_HS_EP1_OUT_IRQHandler();
+void __attribute__((weak)) OTG_HS_EP1_IN_IRQHandler();
+void __attribute__((weak)) OTG_HS_WKUP_IRQHandler();
+void __attribute__((weak)) OTG_HS_IRQHandler();
+void __attribute__((weak)) DCMI_IRQHandler();
+void __attribute__((weak)) CRYP_IRQHandler();
+void __attribute__((weak)) RNG_IRQHandler();
+void __attribute__((weak)) FPU_IRQHandler();
+void __attribute__((weak)) UART7_IRQHandler();
+void __attribute__((weak)) UART8_IRQHandler();
+void __attribute__((weak)) SPI4_IRQHandler();
+void __attribute__((weak)) SPI5_IRQHandler();
+void __attribute__((weak)) SPI6_IRQHandler();
+void __attribute__((weak)) SAI1_IRQHandler();
+void __attribute__((weak)) LTDC_IRQHandler();
+void __attribute__((weak)) LTDC_ER_IRQHandler();
+void __attribute__((weak)) DMA2D_IRQHandler();
+void __attribute__((weak)) SAI2_IRQHandler();
+void __attribute__((weak)) QUADSPI_IRQHandler();
+void __attribute__((weak)) LPTIM1_IRQHandler();
+void __attribute__((weak)) CEC_IRQHandler();
+void __attribute__((weak)) I2C4_EV_IRQHandler();
+void __attribute__((weak)) I2C4_ER_IRQHandler();
+void __attribute__((weak)) SPDIF_RX_IRQHandler();
+void __attribute__((weak)) DSIHOST_IRQHandler();
+void __attribute__((weak)) DFSDM1_FLT0_IRQHandler();
+void __attribute__((weak)) DFSDM1_FLT1_IRQHandler();
+void __attribute__((weak)) DFSDM1_FLT2_IRQHandler();
+void __attribute__((weak)) DFSDM1_FLT3_IRQHandler();
+void __attribute__((weak)) SDMMC2_IRQHandler();
+void __attribute__((weak)) CAN3_TX_IRQHandler();
+void __attribute__((weak)) CAN3_RX0_IRQHandler();
+void __attribute__((weak)) CAN3_RX1_IRQHandler();
+void __attribute__((weak)) CAN3_SCE_IRQHandler();
+void __attribute__((weak)) JPEG_IRQHandler();
+void __attribute__((weak)) MDIOS_IRQHandler();
+
+// Stack top, defined in the linker script
+extern char _main_stack_top asm("_main_stack_top");
+
+// Interrupt vectors, must be placed @ address 0x00000000
+// The extern declaration is required otherwise g++ optimizes it out
+extern void (*const __Vectors[])();
+void (*const __Vectors[])() __attribute__((section(".isr_vector"))) =
+{
+ reinterpret_cast<void (*)()>(&_main_stack_top), /* Stack pointer*/
+ Reset_Handler, /* Reset Handler */
+ NMI_Handler, /* NMI Handler */
+ HardFault_Handler, /* Hard Fault Handler */
+ MemManage_Handler, /* MPU Fault Handler */
+ BusFault_Handler, /* Bus Fault Handler */
+ UsageFault_Handler, /* Usage Fault Handler */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ SVC_Handler, /* SVCall Handler */
+ DebugMon_Handler, /* Debug Monitor Handler */
+ 0, /* Reserved */
+ PendSV_Handler, /* PendSV Handler */
+ SysTick_Handler, /* SysTick Handler */
+
+ /* External Interrupts */
+ WWDG_IRQHandler,
+ PVD_IRQHandler,
+ TAMP_STAMP_IRQHandler,
+ RTC_WKUP_IRQHandler,
+ FLASH_IRQHandler,
+ RCC_IRQHandler,
+ EXTI0_IRQHandler,
+ EXTI1_IRQHandler,
+ EXTI2_IRQHandler,
+ EXTI3_IRQHandler,
+ EXTI4_IRQHandler,
+ DMA1_Stream0_IRQHandler,
+ DMA1_Stream1_IRQHandler,
+ DMA1_Stream2_IRQHandler,
+ DMA1_Stream3_IRQHandler,
+ DMA1_Stream4_IRQHandler,
+ DMA1_Stream5_IRQHandler,
+ DMA1_Stream6_IRQHandler,
+ ADC_IRQHandler,
+ CAN1_TX_IRQHandler,
+ CAN1_RX0_IRQHandler,
+ CAN1_RX1_IRQHandler,
+ CAN1_SCE_IRQHandler,
+ EXTI9_5_IRQHandler,
+ TIM1_BRK_TIM9_IRQHandler,
+ TIM1_UP_TIM10_IRQHandler,
+ TIM1_TRG_COM_TIM11_IRQHandler,
+ TIM1_CC_IRQHandler,
+ TIM2_IRQHandler,
+ TIM3_IRQHandler,
+ TIM4_IRQHandler,
+ I2C1_EV_IRQHandler,
+ I2C1_ER_IRQHandler,
+ I2C2_EV_IRQHandler,
+ I2C2_ER_IRQHandler,
+ SPI1_IRQHandler,
+ SPI2_IRQHandler,
+ USART1_IRQHandler,
+ USART2_IRQHandler,
+ USART3_IRQHandler,
+ EXTI15_10_IRQHandler,
+ RTC_Alarm_IRQHandler,
+ OTG_FS_WKUP_IRQHandler,
+ TIM8_BRK_TIM12_IRQHandler,
+ TIM8_UP_TIM13_IRQHandler,
+ TIM8_TRG_COM_TIM14_IRQHandler,
+ TIM8_CC_IRQHandler,
+ DMA1_Stream7_IRQHandler,
+ FMC_IRQHandler,
+ SDMMC1_IRQHandler,
+ TIM5_IRQHandler,
+ SPI3_IRQHandler,
+ UART4_IRQHandler,
+ UART5_IRQHandler,
+ TIM6_DAC_IRQHandler,
+ TIM7_IRQHandler,
+ DMA2_Stream0_IRQHandler,
+ DMA2_Stream1_IRQHandler,
+ DMA2_Stream2_IRQHandler,
+ DMA2_Stream3_IRQHandler,
+ DMA2_Stream4_IRQHandler,
+ ETH_IRQHandler,
+ ETH_WKUP_IRQHandler,
+ CAN2_TX_IRQHandler,
+ CAN2_RX0_IRQHandler,
+ CAN2_RX1_IRQHandler,
+ CAN2_SCE_IRQHandler,
+ OTG_FS_IRQHandler,
+ DMA2_Stream5_IRQHandler,
+ DMA2_Stream6_IRQHandler,
+ DMA2_Stream7_IRQHandler,
+ USART6_IRQHandler,
+ I2C3_EV_IRQHandler,
+ I2C3_ER_IRQHandler,
+ OTG_HS_EP1_OUT_IRQHandler,
+ OTG_HS_EP1_IN_IRQHandler,
+ OTG_HS_WKUP_IRQHandler,
+ OTG_HS_IRQHandler,
+ DCMI_IRQHandler,
+ CRYP_IRQHandler,
+ RNG_IRQHandler,
+ FPU_IRQHandler,
+ UART7_IRQHandler,
+ UART8_IRQHandler,
+ SPI4_IRQHandler,
+ SPI5_IRQHandler,
+ SPI6_IRQHandler,
+ SAI1_IRQHandler,
+ LTDC_IRQHandler,
+ LTDC_ER_IRQHandler,
+ DMA2D_IRQHandler,
+ SAI2_IRQHandler,
+ QUADSPI_IRQHandler,
+ LPTIM1_IRQHandler,
+ CEC_IRQHandler,
+ I2C4_EV_IRQHandler,
+ I2C4_ER_IRQHandler,
+ SPDIF_RX_IRQHandler,
+ DSIHOST_IRQHandler,
+ DFSDM1_FLT0_IRQHandler,
+ DFSDM1_FLT1_IRQHandler,
+ DFSDM1_FLT2_IRQHandler,
+ DFSDM1_FLT3_IRQHandler,
+ SDMMC2_IRQHandler,
+ CAN3_TX_IRQHandler,
+ CAN3_RX0_IRQHandler,
+ CAN3_RX1_IRQHandler,
+ CAN3_SCE_IRQHandler,
+ JPEG_IRQHandler,
+ MDIOS_IRQHandler,
+};
+
+#pragma weak WWDG_IRQHandler = Default_Handler
+#pragma weak PVD_IRQHandler = Default_Handler
+#pragma weak TAMP_STAMP_IRQHandler = Default_Handler
+#pragma weak RTC_WKUP_IRQHandler = Default_Handler
+#pragma weak FLASH_IRQHandler = Default_Handler
+#pragma weak RCC_IRQHandler = Default_Handler
+#pragma weak EXTI0_IRQHandler = Default_Handler
+#pragma weak EXTI1_IRQHandler = Default_Handler
+#pragma weak EXTI2_IRQHandler = Default_Handler
+#pragma weak EXTI3_IRQHandler = Default_Handler
+#pragma weak EXTI4_IRQHandler = Default_Handler
+#pragma weak DMA1_Stream0_IRQHandler = Default_Handler
+#pragma weak DMA1_Stream1_IRQHandler = Default_Handler
+#pragma weak DMA1_Stream2_IRQHandler = Default_Handler
+#pragma weak DMA1_Stream3_IRQHandler = Default_Handler
+#pragma weak DMA1_Stream4_IRQHandler = Default_Handler
+#pragma weak DMA1_Stream5_IRQHandler = Default_Handler
+#pragma weak DMA1_Stream6_IRQHandler = Default_Handler
+#pragma weak ADC_IRQHandler = Default_Handler
+#pragma weak CAN1_TX_IRQHandler = Default_Handler
+#pragma weak CAN1_RX0_IRQHandler = Default_Handler
+#pragma weak CAN1_RX1_IRQHandler = Default_Handler
+#pragma weak CAN1_SCE_IRQHandler = Default_Handler
+#pragma weak EXTI9_5_IRQHandler = Default_Handler
+#pragma weak TIM1_BRK_TIM9_IRQHandler = Default_Handler
+#pragma weak TIM1_UP_TIM10_IRQHandler = Default_Handler
+#pragma weak TIM1_TRG_COM_TIM11_IRQHandler = Default_Handler
+#pragma weak TIM1_CC_IRQHandler = Default_Handler
+#pragma weak TIM2_IRQHandler = Default_Handler
+#pragma weak TIM3_IRQHandler = Default_Handler
+#pragma weak TIM4_IRQHandler = Default_Handler
+#pragma weak I2C1_EV_IRQHandler = Default_Handler
+#pragma weak I2C1_ER_IRQHandler = Default_Handler
+#pragma weak I2C2_EV_IRQHandler = Default_Handler
+#pragma weak I2C2_ER_IRQHandler = Default_Handler
+#pragma weak SPI1_IRQHandler = Default_Handler
+#pragma weak SPI2_IRQHandler = Default_Handler
+// #pragma weak USART1_IRQHandler = Default_Handler
+// #pragma weak USART2_IRQHandler = Default_Handler
+// #pragma weak USART3_IRQHandler = Default_Handler
+#pragma weak EXTI15_10_IRQHandler = Default_Handler
+#pragma weak RTC_Alarm_IRQHandler = Default_Handler
+#pragma weak OTG_FS_WKUP_IRQHandler = Default_Handler
+#pragma weak TIM8_BRK_TIM12_IRQHandler = Default_Handler
+#pragma weak TIM8_UP_TIM13_IRQHandler = Default_Handler
+#pragma weak TIM8_TRG_COM_TIM14_IRQHandler = Default_Handler
+#pragma weak TIM8_CC_IRQHandler = Default_Handler
+#pragma weak DMA1_Stream7_IRQHandler = Default_Handler
+#pragma weak FMC_IRQHandler = Default_Handler
+#pragma weak SDMMC1_IRQHandler = Default_Handler
+#pragma weak TIM5_IRQHandler = Default_Handler
+#pragma weak SPI3_IRQHandler = Default_Handler
+// #pragma weak UART4_IRQHandler = Default_Handler
+// #pragma weak UART5_IRQHandler = Default_Handler
+#pragma weak TIM6_DAC_IRQHandler = Default_Handler
+#pragma weak TIM7_IRQHandler = Default_Handler
+#pragma weak DMA2_Stream0_IRQHandler = Default_Handler
+#pragma weak DMA2_Stream1_IRQHandler = Default_Handler
+#pragma weak DMA2_Stream2_IRQHandler = Default_Handler
+#pragma weak DMA2_Stream3_IRQHandler = Default_Handler
+#pragma weak DMA2_Stream4_IRQHandler = Default_Handler
+#pragma weak ETH_IRQHandler = Default_Handler
+#pragma weak ETH_WKUP_IRQHandler = Default_Handler
+#pragma weak CAN2_TX_IRQHandler = Default_Handler
+#pragma weak CAN2_RX0_IRQHandler = Default_Handler
+#pragma weak CAN2_RX1_IRQHandler = Default_Handler
+#pragma weak CAN2_SCE_IRQHandler = Default_Handler
+#pragma weak OTG_FS_IRQHandler = Default_Handler
+#pragma weak DMA2_Stream5_IRQHandler = Default_Handler
+#pragma weak DMA2_Stream6_IRQHandler = Default_Handler
+#pragma weak DMA2_Stream7_IRQHandler = Default_Handler
+// #pragma weak USART6_IRQHandler = Default_Handler
+#pragma weak I2C3_EV_IRQHandler = Default_Handler
+#pragma weak I2C3_ER_IRQHandler = Default_Handler
+#pragma weak OTG_HS_EP1_OUT_IRQHandler = Default_Handler
+#pragma weak OTG_HS_EP1_IN_IRQHandler = Default_Handler
+#pragma weak OTG_HS_WKUP_IRQHandler = Default_Handler
+#pragma weak OTG_HS_IRQHandler = Default_Handler
+#pragma weak DCMI_IRQHandler = Default_Handler
+#pragma weak CRYP_IRQHandler = Default_Handler
+#pragma weak RNG_IRQHandler = Default_Handler
+#pragma weak FPU_IRQHandler = Default_Handler
+// #pragma weak UART7_IRQHandler = Default_Handler
+// #pragma weak UART8_IRQHandler = Default_Handler
+#pragma weak SPI4_IRQHandler = Default_Handler
+#pragma weak SPI5_IRQHandler = Default_Handler
+#pragma weak SPI6_IRQHandler = Default_Handler
+#pragma weak SAI1_IRQHandler = Default_Handler
+#pragma weak LTDC_IRQHandler = Default_Handler
+#pragma weak LTDC_ER_IRQHandler = Default_Handler
+#pragma weak DMA2D_IRQHandler = Default_Handler
+#pragma weak SAI2_IRQHandler = Default_Handler
+#pragma weak QUADSPI_IRQHandler = Default_Handler
+#pragma weak LPTIM1_IRQHandler = Default_Handler
+#pragma weak CEC_IRQHandler = Default_Handler
+#pragma weak I2C4_EV_IRQHandler = Default_Handler
+#pragma weak I2C4_ER_IRQHandler = Default_Handler
+#pragma weak SPDIF_RX_IRQHandler = Default_Handler
+#pragma weak DSIHOST_IRQHandler = Default_Handler
+#pragma weak DFSDM1_FLT0_IRQHandler = Default_Handler
+#pragma weak DFSDM1_FLT1_IRQHandler = Default_Handler
+#pragma weak DFSDM1_FLT2_IRQHandler = Default_Handler
+#pragma weak DFSDM1_FLT3_IRQHandler = Default_Handler
+#pragma weak SDMMC2_IRQHandler = Default_Handler
+#pragma weak CAN3_TX_IRQHandler = Default_Handler
+#pragma weak CAN3_RX0_IRQHandler = Default_Handler
+#pragma weak CAN3_RX1_IRQHandler = Default_Handler
+#pragma weak CAN3_SCE_IRQHandler = Default_Handler
+#pragma weak JPEG_IRQHandler = Default_Handler
+#pragma weak MDIOS_IRQHandler = Default_Handler
diff --git a/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/arch_registers_impl.h b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/arch_registers_impl.h
new file mode 100644
index 0000000000000000000000000000000000000000..3962a08f19b6c277ba3f474f01891f829ae398fb
--- /dev/null
+++ b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/arch_registers_impl.h
@@ -0,0 +1,17 @@
+#ifndef ARCH_REGISTERS_IMPL_H
+#define ARCH_REGISTERS_IMPL_H
+
+// stm32f7xx.h defines a few macros like __ICACHE_PRESENT, __DCACHE_PRESENT and
+// includes core_cm7.h. Do not include core_cm7.h before.
+#define STM32F767xx
+#include "CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h"
+
+#if (__ICACHE_PRESENT != 1) || (__DCACHE_PRESENT != 1)
+#error "Wrong include order"
+#endif
+
+#include "CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h"
+
+#define RCC_SYNC() __DSB() // TODO: can this dsb be removed?
+
+#endif // ARCH_REGISTERS_IMPL_H
diff --git a/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/bsp.cpp b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/bsp.cpp
new file mode 100644
index 0000000000000000000000000000000000000000..71ffe57733cad43b5b98154690cbadf115b85b05
--- /dev/null
+++ b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/bsp.cpp
@@ -0,0 +1,368 @@
+/***************************************************************************
+ * Copyright (C) 2018 by Terraneo Federico *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * As a special exception, if other files instantiate templates or use *
+ * macros or inline functions from this file, or you compile this file *
+ * and link it with other works to produce a work based on this file, *
+ * this file does not by itself cause the resulting work to be covered *
+ * by the GNU General Public License. However the source code for this *
+ * file must still be made available in accordance with the GNU General *
+ * Public License. This exception does not invalidate any other reasons *
+ * why a work based on this file might be covered by the GNU General *
+ * Public License. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, see <http://www.gnu.org/licenses/> *
+ ***************************************************************************/
+
+/***********************************************************************
+ * bsp.cpp Part of the Miosix Embedded OS.
+ * Board support package, this file initializes hardware.
+ ************************************************************************/
+
+#include "interfaces/bsp.h"
+
+#include <inttypes.h>
+#include <sys/ioctl.h>
+
+#include <cstdlib>
+
+#include "board_settings.h"
+#include "config/miosix_settings.h"
+#include "drivers/sd_stm32f2_f4_f7.h"
+#include "drivers/serial.h"
+#include "drivers/serial_stm32.h"
+#include "drivers/stm32_backup_domain.h"
+#include "filesystem/console/console_device.h"
+#include "filesystem/file_access.h"
+#include "hwmapping.h"
+#include "interfaces/arch_registers.h"
+#include "interfaces/delays.h"
+#include "interfaces/portability.h"
+#include "kernel/kernel.h"
+#include "kernel/logging.h"
+#include "kernel/sync.h"
+
+namespace miosix
+{
+
+//
+// Initialization
+//
+
+static void sdramCommandWait()
+{
+ for (int i = 0; i < 0xffff; i++)
+ if ((FMC_Bank5_6->SDSR & FMC_SDSR_BUSY) == 0)
+ return;
+}
+
+void configureSdram()
+{
+ // Enable gpios used by the ram
+ RCC->AHB1ENR |= RCC_AHB1ENR_GPIOBEN | RCC_AHB1ENR_GPIOCEN |
+ RCC_AHB1ENR_GPIODEN | RCC_AHB1ENR_GPIOEEN |
+ RCC_AHB1ENR_GPIOFEN | RCC_AHB1ENR_GPIOGEN;
+ RCC_SYNC();
+
+ // On the compute unit with F767ZI, the SDRAM pins are:
+ // - PG8: FMC_SDCLK (sdram clock)
+ // - PB5: FMC_SDCKE1 (sdram bank 2 clock enable)
+ // - PB6: FMC_SDNE1 (sdram bank 2 chip enable)
+ // - PF0: FMC_A0
+ // - PF1: FMC_A1
+ // - PF2: FMC_A2
+ // - PF3: FMC_A3
+ // - PF4: FMC_A4
+ // - PF5: FMC_A5
+ // - PF12: FMC_A6
+ // - PF13: FMC_A7
+ // - PF14: FMC_A8
+ // - PF15: FMC_A9
+ // - PG0: FMC_A10
+ // - PG1: FMC_A11
+ // - PG2: FMC_A12 (used only by the 32MB ram, not by the 8MB one)
+ // - PD14: FMC_D0
+ // - PD15: FMC_D1
+ // - PD0: FMC_D2
+ // - PD1: FMC_D3
+ // - PE7: FMC_D4
+ // - PE8: FMC_D5
+ // - PE9: FMC_D6
+ // - PE10: FMC_D7
+ // - PE11: FMC_D8
+ // - PE12: FMC_D9
+ // - PE13: FMC_D10
+ // - PE14: FMC_D11
+ // - PE15: FMC_D12
+ // - PD8: FMC_D13
+ // - PD9: FMC_D14
+ // - PD10: FMC_D15
+
+ // - PG4: FMC_BA0
+ // - PG5: FMC_BA1
+ // - PF11: FMC_SDNRAS
+ // - PG15: FMC_SDNCAS
+ // - PC0: FMC_SDNWE
+ // - PE0: FMC_NBL0
+ // - PE1: FMC_NBL1
+
+ // All SDRAM GPIOs needs to be configured with alternate function 12 and
+ // maximum speed
+
+ // WARNING: The current configuration is for the 8MB ram
+
+ // Alternate functions
+ GPIOB->AFR[0] = 0x0cc00000;
+ GPIOC->AFR[0] = 0x0000000c;
+ GPIOD->AFR[0] = 0x000000cc;
+ GPIOD->AFR[1] = 0xcc000ccc;
+ GPIOE->AFR[0] = 0xc00000cc;
+ GPIOE->AFR[1] = 0xcccccccc;
+ GPIOF->AFR[0] = 0x00cccccc;
+ GPIOF->AFR[1] = 0xccccc000;
+ GPIOG->AFR[0] = 0x00cc0ccc;
+ GPIOG->AFR[1] = 0xc000000c;
+
+ // Mode
+ GPIOB->MODER = 0x00002800;
+ GPIOC->MODER = 0x00000002;
+ GPIOD->MODER = 0xa02a000a;
+ GPIOE->MODER = 0xaaaa800a;
+ GPIOF->MODER = 0xaa800aaa;
+ GPIOG->MODER = 0x80020a2a;
+
+ // Speed (high speed for all, very high speed for SDRAM pins)
+ GPIOB->OSPEEDR = 0x00003c00;
+ GPIOC->OSPEEDR = 0x00000003;
+ GPIOD->OSPEEDR = 0xf03f000f;
+ GPIOE->OSPEEDR = 0xffffc00f;
+ GPIOF->OSPEEDR = 0xffc00fff;
+ GPIOG->OSPEEDR = 0xc0030f3f;
+
+ // Since we'we un-configured PB3 and PB4 (by default they are SWO and NJRST)
+ // finish the job and remove the default pull-up
+ GPIOB->PUPDR = 0;
+
+ // Enable the SDRAM controller clock
+ RCC->AHB3ENR |= RCC_AHB3ENR_FMCEN;
+ RCC_SYNC();
+
+ // The SDRAM is a AS4C4M16SA-6TAN
+ // HCLK = 216MHz -> SDRAM clock = HCLK/2 = 133MHz
+
+ // 1. Memory device features
+ FMC_Bank5_6->SDCR[0] = 0 // 0 delay after CAS latency
+ | FMC_SDCR1_RBURST // Enable read bursts
+ | FMC_SDCR1_SDCLK_1; // SDCLK = HCLK / 2
+ FMC_Bank5_6->SDCR[1] = 0 // Write accesses allowed
+ | FMC_SDCR2_CAS_1 // 2 cycles CAS latency
+ | FMC_SDCR2_NB // 4 internal banks
+ | FMC_SDCR2_MWID_0 // 16 bit data bus
+ | FMC_SDCR2_NR_1 // 13 bit row address
+ | 0; // 8 bit column address
+
+// 2. Memory device timings
+#ifdef SYSCLK_FREQ_216MHz
+ // SDRAM timings. One clock cycle is 9.26ns
+ FMC_Bank5_6->SDTR[0] =
+ (2 - 1) << FMC_SDTR1_TRP_Pos // 2 cycles TRP (18.52ns > 18ns)
+ | (7 - 1) << FMC_SDTR1_TRC_Pos; // 7 cycles TRC (64.82ns > 60ns)
+ FMC_Bank5_6->SDTR[1] =
+ (2 - 1) << FMC_SDTR1_TRCD_Pos // 2 cycles TRCD (18.52ns > 18ns)
+ | (2 - 1) << FMC_SDTR1_TWR_Pos // 2 cycles TWR (min 2cc > 12ns)
+ | (5 - 1) << FMC_SDTR1_TRAS_Pos // 5 cycles TRAS (46.3ns > 42ns)
+ | (7 - 1) << FMC_SDTR1_TXSR_Pos // 7 cycles TXSR (74.08ns > 61.5ns)
+ | (2 - 1) << FMC_SDTR1_TMRD_Pos; // 2 cycles TMRD (min 2cc > 12ns)
+#else
+#error No SDRAM timings for this clock
+#endif
+
+ // 3. Enable the bank 2 clock
+ FMC_Bank5_6->SDCMR = FMC_SDCMR_MODE_0 // Clock Configuration Enable
+ | FMC_SDCMR_CTB2; // Bank 2
+ sdramCommandWait();
+
+ // 4. Wait during command execution
+ delayUs(100);
+
+ // 5. Issue a "Precharge All" command
+ FMC_Bank5_6->SDCMR = FMC_SDCMR_MODE_1 // Precharge all
+ | FMC_SDCMR_CTB2; // Bank 2
+ sdramCommandWait();
+
+ // 6. Issue Auto-Refresh commands
+ FMC_Bank5_6->SDCMR = FMC_SDCMR_MODE_1 | FMC_SDCMR_MODE_0 // Auto-Refresh
+ | FMC_SDCMR_CTB2 // Bank 2
+ | (8 - 1) << FMC_SDCMR_NRFS_Pos; // 2 Auto-Refresh
+ sdramCommandWait();
+
+ // 7. Issue a Load Mode Register command
+ FMC_Bank5_6->SDCMR = FMC_SDCMR_MODE_2 /// Load mode register
+ | FMC_SDCMR_CTB2 // Bank 2
+ | 0x220 << FMC_SDCMR_MRD_Pos; // CAS = 2, burst = 1
+ sdramCommandWait();
+
+// 8. Program the refresh rate (4K / 32ms)
+// 64ms / 8192 = 7.8125us
+#ifdef SYSCLK_FREQ_216MHz
+ // 7.8125us * 133MHz = 1039 - 20 = 1019
+ FMC_Bank5_6->SDRTR = 1019 << FMC_SDRTR_COUNT_Pos;
+#else
+#error No SDRAM refresh timings for this clock
+#endif
+}
+
+void IRQbspInit()
+{
+ // Enable USART1 pins port
+ RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN;
+
+ userLed1::mode(Mode::OUTPUT);
+ userLed2::mode(Mode::OUTPUT);
+ userLed3_1::mode(Mode::OUTPUT);
+ userLed3_2::mode(Mode::OUTPUT);
+ userLed4::mode(Mode::OUTPUT);
+ userSwitch::mode(Mode::INPUT);
+
+ using namespace interfaces;
+ spi1::sck::mode(Mode::ALTERNATE);
+ spi1::sck::alternateFunction(5);
+ spi1::miso::mode(Mode::ALTERNATE);
+ spi1::miso::alternateFunction(5);
+ spi1::mosi::mode(Mode::ALTERNATE);
+ spi1::mosi::alternateFunction(5);
+
+ spi3::sck::mode(Mode::ALTERNATE);
+ spi3::sck::alternateFunction(6);
+ spi3::miso::mode(Mode::ALTERNATE);
+ spi3::miso::alternateFunction(6);
+ spi3::mosi::mode(Mode::ALTERNATE);
+ spi3::mosi::alternateFunction(5);
+
+ spi4::sck::mode(Mode::ALTERNATE);
+ spi4::sck::alternateFunction(5);
+ spi4::miso::mode(Mode::ALTERNATE);
+ spi4::miso::alternateFunction(5);
+ spi4::mosi::mode(Mode::ALTERNATE);
+ spi4::mosi::alternateFunction(5);
+
+ can2::rx::mode(Mode::ALTERNATE);
+ can2::rx::alternateFunction(9);
+ can2::tx::mode(Mode::ALTERNATE);
+ can2::tx::alternateFunction(9);
+
+ usart1::tx::mode(Mode::ALTERNATE);
+ usart1::tx::alternateFunction(7);
+ usart1::rx::mode(Mode::ALTERNATE);
+ usart1::rx::alternateFunction(7);
+
+ usart2::tx::mode(Mode::ALTERNATE);
+ usart2::tx::alternateFunction(7);
+ usart2::rx::mode(Mode::ALTERNATE);
+ usart2::rx::alternateFunction(7);
+
+ using namespace radio;
+ cs::mode(Mode::OUTPUT);
+ cs::getPin().high();
+ dio0::mode(Mode::INPUT);
+ dio1::mode(Mode::INPUT);
+ dio3::mode(Mode::INPUT);
+ tx_enable::mode(Mode::OUTPUT);
+ rx_enable::mode(Mode::OUTPUT);
+
+ using namespace timers;
+ tim3ch2::mode(Mode::ALTERNATE);
+ tim3ch2::alternateFunction(2);
+ tim4ch1::mode(Mode::ALTERNATE);
+ tim4ch1::alternateFunction(2);
+
+ stepper1::enable::mode(Mode::OUTPUT);
+ stepper1::direction::mode(Mode::OUTPUT);
+
+ stepper2::enable::mode(Mode::OUTPUT);
+ stepper2::direction::mode(Mode::OUTPUT);
+
+ DefaultConsole::instance().IRQset(intrusive_ref_ptr<Device>(new STM32Serial(
+ defaultSerial, defaultSerialSpeed, STM32Serial::NOFLOWCTRL)));
+}
+
+void bspInit2()
+{
+#ifdef WITH_FILESYSTEM
+ basicFilesystemSetup(SDIODriver::instance());
+#endif // WITH_FILESYSTEM
+
+#ifdef WITH_BACKUP_SRAM
+ BackupDomain::instance().enable();
+ BackupDomain::instance().enableBackupSRAM();
+#endif
+
+ // Print the reset reason
+ bootlog("Reset reson: ");
+ switch (BackupDomain::instance().lastResetReason())
+ {
+ case ResetReason::RST_LOW_PWR:
+ bootlog("low power\n");
+ break;
+ case ResetReason::RST_WINDOW_WDG:
+ bootlog("window watchdog\n");
+ break;
+ case ResetReason::RST_INDEPENDENT_WDG:
+ bootlog("indeendent watchdog\n");
+ break;
+ case ResetReason::RST_SW:
+ bootlog("software reset\n");
+ break;
+ case ResetReason::RST_POWER_ON:
+ bootlog("power on\n");
+ break;
+ case ResetReason::RST_PIN:
+ bootlog("reset pin\n");
+ break;
+ case ResetReason::RST_UNKNOWN:
+ bootlog("unknown\n");
+ break;
+ }
+}
+
+//
+// Shutdown and reboot
+//
+
+void shutdown()
+{
+ ioctl(STDOUT_FILENO, IOCTL_SYNC, 0);
+
+#ifdef WITH_FILESYSTEM
+ FilesystemManager::instance().umountAll();
+#endif // WITH_FILESYSTEM
+
+ disableInterrupts();
+ for (;;)
+ ;
+}
+
+void reboot()
+{
+ ioctl(STDOUT_FILENO, IOCTL_SYNC, 0);
+
+#ifdef WITH_FILESYSTEM
+ FilesystemManager::instance().umountAll();
+#endif // WITH_FILESYSTEM
+
+ disableInterrupts();
+ miosix_private::IRQsystemReboot();
+}
+
+} // namespace miosix
diff --git a/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/bsp_impl.h b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/bsp_impl.h
new file mode 100644
index 0000000000000000000000000000000000000000..1e3adc255428abb1251db04ada2726669188025e
--- /dev/null
+++ b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/bsp_impl.h
@@ -0,0 +1,121 @@
+/***************************************************************************
+ * Copyright (C) 2018 by Terraneo Federico *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * As a special exception, if other files instantiate templates or use *
+ * macros or inline functions from this file, or you compile this file *
+ * and link it with other works to produce a work based on this file, *
+ * this file does not by itself cause the resulting work to be covered *
+ * by the GNU General Public License. However the source code for this *
+ * file must still be made available in accordance with the GNU General *
+ * Public License. This exception does not invalidate any other reasons *
+ * why a work based on this file might be covered by the GNU General *
+ * Public License. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, see <http://www.gnu.org/licenses/> *
+ ***************************************************************************/
+
+/***************************************************************************
+ * bsp_impl.h Part of the Miosix Embedded OS.
+ * Board support package, this file initializes hardware.
+ ***************************************************************************/
+
+#ifndef BSP_IMPL_H
+#define BSP_IMPL_H
+
+#include "config/miosix_settings.h"
+#include "interfaces/gpio.h"
+
+namespace miosix
+{
+
+/**
+\addtogroup Hardware
+\{
+*/
+
+/**
+ * \internal
+ * Called by stage_1_boot.cpp to enable the SDRAM before initializing .data/.bss
+ * Requires the CPU clock to be already configured (running from the PLL)
+ */
+void configureSdram();
+
+/**
+ * \internal
+ * Board pin definition
+ */
+typedef Gpio<GPIOB_BASE, 7> userLed1;
+typedef Gpio<GPIOE_BASE, 3> userLed2;
+typedef Gpio<GPIOC_BASE, 13> userLed3_1;
+typedef Gpio<GPIOG_BASE, 9> userLed3_2;
+typedef Gpio<GPIOC_BASE, 2> userLed4;
+typedef Gpio<GPIOB_BASE, 2> userSwitch;
+
+inline void ledOn()
+{
+ userLed1::high();
+ userLed2::high();
+ userLed3_1::high();
+ userLed3_2::high();
+ userLed4::high();
+}
+
+inline void ledOff()
+{
+ userLed1::low();
+ userLed2::low();
+ userLed3_1::low();
+ userLed3_2::low();
+ userLed4::low();
+}
+
+inline void led1On() { userLed1::high(); }
+
+inline void led1Off() { userLed1::low(); }
+
+inline void led2On() { userLed2::high(); }
+
+inline void led2Off() { userLed2::low(); }
+
+inline void led3On()
+{
+ userLed3_1::high();
+ userLed3_2::high();
+}
+
+inline void led3Off()
+{
+ userLed3_1::low();
+ userLed3_2::low();
+}
+
+/**
+ * Polls the SD card sense GPIO.
+ *
+ * This board has no SD card whatsoever, but a card can be connected to the
+ * following GPIOs:
+ * TODO: never tested
+ *
+ * \return true. As there's no SD card sense switch, let's pretend that
+ * the card is present.
+ */
+inline bool sdCardSense() { return true; }
+
+/**
+\}
+*/
+
+} // namespace miosix
+
+#endif // BSP_IMPL_H
diff --git a/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/hwmapping.h b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/hwmapping.h
new file mode 100644
index 0000000000000000000000000000000000000000..a1e5d4adc6d427482975ba70ac352cfafcde5502
--- /dev/null
+++ b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/interfaces-impl/hwmapping.h
@@ -0,0 +1,119 @@
+/***************************************************************************
+ * Copyright (C) 2018 by Terraneo Federico *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * As a special exception, if other files instantiate templates or use *
+ * macros or inline functions from this file, or you compile this file *
+ * and link it with other works to produce a work based on this file, *
+ * this file does not by itself cause the resulting work to be covered *
+ * by the GNU General Public License. However the source code for this *
+ * file must still be made available in accordance with the GNU General *
+ * Public License. This exception does not invalidate any other reasons *
+ * why a work based on this file might be covered by the GNU General *
+ * Public License. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, see <http://www.gnu.org/licenses/> *
+ ***************************************************************************/
+
+#pragma once
+
+#include "interfaces/gpio.h"
+
+namespace miosix
+{
+namespace interfaces
+{
+// RADIO 1
+namespace spi1
+{
+using sck = Gpio<GPIOA_BASE, 5>;
+using miso = Gpio<GPIOA_BASE, 6>;
+using mosi = Gpio<GPIOA_BASE, 7>;
+} // namespace spi1
+
+// FREE SPI
+namespace spi3
+{
+using sck = Gpio<GPIOB_BASE, 3>;
+using miso = Gpio<GPIOB_BASE, 4>;
+using mosi = Gpio<GPIOD_BASE, 6>;
+} // namespace spi3
+
+// ETHERNET
+namespace spi4
+{
+using sck = Gpio<GPIOE_BASE, 2>;
+using miso = Gpio<GPIOE_BASE, 5>;
+using mosi = Gpio<GPIOE_BASE, 6>;
+} // namespace spi4
+
+namespace can2
+{
+using rx = Gpio<GPIOB_BASE, 12>;
+using tx = Gpio<GPIOB_BASE, 13>;
+} // namespace can2
+
+// DBG
+namespace usart1
+{
+using tx = Gpio<GPIOA_BASE, 9>;
+using rx = Gpio<GPIOA_BASE, 10>;
+} // namespace usart1
+
+// FREE USART
+namespace usart2
+{
+using tx = Gpio<GPIOA_BASE, 2>;
+using rx = Gpio<GPIOA_BASE, 3>;
+} // namespace usart2
+
+namespace timers
+{
+using tim3ch2 = Gpio<GPIOC_BASE, 7>; // step 1
+using tim1ch4 = Gpio<GPIOA_BASE, 11>; // count 1
+using tim4ch1 = Gpio<GPIOD_BASE, 12>; // step 2
+using tim8ch4 = Gpio<GPIOC_BASE, 9>; // count 2
+} // namespace timers
+
+} // namespace interfaces
+
+namespace radio
+{
+using sck = interfaces::spi1::sck;
+using miso = interfaces::spi1::miso;
+using mosi = interfaces::spi1::mosi;
+using cs = Gpio<GPIOA_BASE, 4>;
+using dio0 = Gpio<GPIOC_BASE, 6>;
+using dio1 = Gpio<GPIOD_BASE, 4>;
+using dio3 = Gpio<GPIOD_BASE, 5>;
+using rx_enable = Gpio<GPIOB_BASE, 9>;
+using tx_enable = Gpio<GPIOB_BASE, 8>;
+} // namespace radio
+
+namespace stepper1
+{
+using enable = Gpio<GPIOA_BASE, 8>;
+using direction = Gpio<GPIOA_BASE, 12>;
+using pulseTimer = interfaces::timers::tim3ch2;
+using countTimer = interfaces::timers::tim1ch4;
+} // namespace stepper1
+
+namespace stepper2
+{
+using enable = Gpio<GPIOB_BASE, 14>;
+using direction = Gpio<GPIOG_BASE, 7>;
+using pulseTimer = interfaces::timers::tim4ch1;
+using countTimer = interfaces::timers::tim8ch4;
+} // namespace stepper2
+
+} // namespace miosix
\ No newline at end of file
diff --git a/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/stm32_2m+16m_xram.ld b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/stm32_2m+16m_xram.ld
new file mode 100644
index 0000000000000000000000000000000000000000..5b3545abd6f3007072b8ff00a978242d74503d79
--- /dev/null
+++ b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/stm32_2m+16m_xram.ld
@@ -0,0 +1,190 @@
+/*
+ * C++ enabled linker script for stm32f769ni (2M FLASH, 512K RAM, 16MB XRAM)
+ * Developed by TFT: Terraneo Federico Technologies
+ * Optimized for use with the Miosix kernel
+ */
+
+/*
+ * This linker script puts:
+ * - read only data and code (.text, .rodata, .eh_*) in FLASH
+ * - the 512Byte main (IRQ) stack, .data and .bss in the DTCM 128KB RAM
+ * - .data, .bss, stacks and heap in the external 16MB SDRAM.
+ */
+
+/*
+ * The main stack is used for interrupt handling by the kernel.
+ *
+ * *** Readme ***
+ * This linker script places the main stack (used by the kernel for interrupts)
+ * at the bottom of the ram, instead of the top. This is done for two reasons:
+ *
+ * - as an optimization for microcontrollers with little ram memory. In fact
+ * the implementation of malloc from newlib requests memory to the OS in 4KB
+ * block (except the first block that can be smaller). This is probably done
+ * for compatibility with OSes with an MMU and paged memory. To see why this
+ * is bad, consider a microcontroller with 8KB of ram: when malloc finishes
+ * up the first 4KB it will call _sbrk_r asking for a 4KB block, but this will
+ * fail because the top part of the ram is used by the main stack. As a
+ * result, the top part of the memory will not be used by malloc, even if
+ * available (and it is nearly *half* the ram on an 8KB mcu). By placing the
+ * main stack at the bottom of the ram, the upper 4KB block will be entirely
+ * free and available as heap space.
+ *
+ * - In case of main stack overflow the cpu will fault because access to memory
+ * before the beginning of the ram faults. Instead with the default stack
+ * placement the main stack will silently collide with the heap.
+ * Note: if increasing the main stack size also increase the ORIGIN value in
+ * the MEMORY definitions below accordingly.
+ */
+
+_main_stack_size = 512; /* main stack = 512Bytes */
+_main_stack_top = 0x20000000 + _main_stack_size;
+ASSERT(_main_stack_size % 8 == 0, "MAIN stack size error");
+
+/* Mapping the heap into XRAM */
+_heap_end = 0xd0000000 + 16M; /* end of available ram */
+
+/* Identify the Entry Point */
+ENTRY(_Z13Reset_Handlerv)
+
+/*
+ * Specify the memory areas
+ *
+ * NOTE: starting at 0x20000000 there's 128KB of DTCM (Data Tightly Coupled
+ * Memory). Technically, we could use this as normal RAM as there's a way for
+ * the DMA to access it, but the datasheet is unclear about performance
+ * penalties for doing so. To avoid nonuniform DMA memory access latencies,
+ * we leave this 128KB DTCM unused except for the first 512Bytes which are for
+ * the interrupt stack. This leaves us with 384KB of RAM
+ */
+MEMORY
+{
+ xram(wx) : ORIGIN = 0xd0000000, LENGTH = 16M
+ sram(wx) : ORIGIN = 0x20020000, LENGTH = 384K
+ dtcm(wx) : ORIGIN = 0x20000000, LENGTH = 128K /* Used for main stack */
+ bram(rw) : ORIGIN = 0x40024000, LENGTH = 4K /* Bakup SRAM */
+ flash(rx) : ORIGIN = 0x08000000, LENGTH = 2M
+}
+
+/* now define the output sections */
+SECTIONS
+{
+ . = 0;
+
+ /* .text section: code goes to flash */
+ .text :
+ {
+ /* Startup code must go at address 0 */
+ KEEP(*(.isr_vector))
+
+ *(.text)
+ *(.text.*)
+ *(.gnu.linkonce.t.*)
+ /* these sections for thumb interwork? */
+ *(.glue_7)
+ *(.glue_7t)
+ /* these sections for C++? */
+ *(.gcc_except_table)
+ *(.gcc_except_table.*)
+ *(.ARM.extab*)
+ *(.gnu.linkonce.armextab.*)
+
+ . = ALIGN(4);
+ /* .rodata: constant data */
+ *(.rodata)
+ *(.rodata.*)
+ *(.gnu.linkonce.r.*)
+
+ /* C++ Static constructors/destructors (eabi) */
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __miosix_init_array_start = .;
+ KEEP (*(SORT(.miosix_init_array.*)))
+ KEEP (*(.miosix_init_array))
+ __miosix_init_array_end = .;
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ . = ALIGN(4);
+ KEEP(*(.fini))
+
+ . = ALIGN(4);
+ __fini_array_start = .;
+ KEEP (*(.fini_array))
+ KEEP (*(SORT(.fini_array.*)))
+ __fini_array_end = .;
+
+ /* C++ Static constructors/destructors (elf) */
+ . = ALIGN(4);
+ _ctor_start = .;
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+ _ctor_end = .;
+
+ . = ALIGN(4);
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+ } > flash
+
+ /* .ARM.exidx is sorted, so has to go in its own output section. */
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > flash
+ __exidx_end = .;
+
+ /*
+ * .data section: global variables go to xram, but also store a copy to
+ * flash to initialize them
+ */
+ .data : ALIGN(8)
+ {
+ _data = .;
+ *(.data)
+ *(.data.*)
+ *(.gnu.linkonce.d.*)
+ . = ALIGN(8);
+ _edata = .;
+ } > xram AT > flash
+ _etext = LOADADDR(.data);
+
+ /* .bss section: uninitialized global variables go to xram */
+ _bss_start = .;
+ .bss :
+ {
+ *(.bss)
+ *(.bss.*)
+ *(.gnu.linkonce.b.*)
+ . = ALIGN(8);
+ } > xram
+ _bss_end = .;
+
+ _end = .;
+ PROVIDE(end = .);
+
+ .preserve(NOLOAD) : ALIGN(4)
+ {
+ _preserve_start = .;
+ . = ALIGN(4);
+ *(.preserve);
+ *(.preserve*);
+ . = ALIGN(4);
+ _preserve_end = .;
+ } > bram
+}
diff --git a/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/stm32_2m+384k_ram.ld b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/stm32_2m+384k_ram.ld
new file mode 100644
index 0000000000000000000000000000000000000000..497bd5198760b9637c774bf3900fd9dfbc01a2b2
--- /dev/null
+++ b/miosix/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/stm32_2m+384k_ram.ld
@@ -0,0 +1,189 @@
+/*
+ * C++ enabled linker script for stm32f767zi (2M FLASH, 512K RAM)
+ * Developed by TFT: Terraneo Federico Technologies
+ * Optimized for use with the Miosix kernel
+ */
+
+/*
+ * This linker script puts:
+ * - read only data and code (.text, .rodata, .eh_*) in FLASH
+ * - the 512Byte main (IRQ) stack, .data and .bss in the DTCM 128KB RAM
+ * - .data, .bss, stacks and heap in the internal RAM.
+ */
+
+/*
+ * The main stack is used for interrupt handling by the kernel.
+ *
+ * *** Readme ***
+ * This linker script places the main stack (used by the kernel for interrupts)
+ * at the bottom of the ram, instead of the top. This is done for two reasons:
+ *
+ * - as an optimization for microcontrollers with little ram memory. In fact
+ * the implementation of malloc from newlib requests memory to the OS in 4KB
+ * block (except the first block that can be smaller). This is probably done
+ * for compatibility with OSes with an MMU and paged memory. To see why this
+ * is bad, consider a microcontroller with 8KB of ram: when malloc finishes
+ * up the first 4KB it will call _sbrk_r asking for a 4KB block, but this will
+ * fail because the top part of the ram is used by the main stack. As a
+ * result, the top part of the memory will not be used by malloc, even if
+ * available (and it is nearly *half* the ram on an 8KB mcu). By placing the
+ * main stack at the bottom of the ram, the upper 4KB block will be entirely
+ * free and available as heap space.
+ *
+ * - In case of main stack overflow the cpu will fault because access to memory
+ * before the beginning of the ram faults. Instead with the default stack
+ * placement the main stack will silently collide with the heap.
+ * Note: if increasing the main stack size also increase the ORIGIN value in
+ * the MEMORY definitions below accordingly.
+ */
+
+_main_stack_size = 512; /* main stack = 512Bytes */
+_main_stack_top = 0x20000000 + _main_stack_size;
+ASSERT(_main_stack_size % 8 == 0, "MAIN stack size error");
+
+/* Mapping the heap to the end of SRAM2 */
+_heap_end = 0x20000000 + 512K; /* end of available ram */
+
+/* Identify the Entry Point */
+ENTRY(_Z13Reset_Handlerv)
+
+/*
+ * Specify the memory areas
+ *
+ * NOTE: starting at 0x20000000 there's 128KB of DTCM (Data Tightly Coupled
+ * Memory). Technically, we could use this as normal RAM as there's a way for
+ * the DMA to access it, but the datasheet is unclear about performance
+ * penalties for doing so. To avoid nonuniform DMA memory access latencies,
+ * we leave this 128KB DTCM unused except for the first 512Bytes which are for
+ * the interrupt stack. This leaves us with 384KB of RAM
+ */
+MEMORY
+{
+ sram(wx) : ORIGIN = 0x20020000, LENGTH = 384K
+ dtcm(wx) : ORIGIN = 0x20000000, LENGTH = 128K /* Used for main stack */
+ bram(rw) : ORIGIN = 0x40024000, LENGTH = 4K /* Bakup SRAM */
+ flash(rx) : ORIGIN = 0x08000000, LENGTH = 2M
+}
+
+/* now define the output sections */
+SECTIONS
+{
+ . = 0;
+
+ /* .text section: code goes to flash */
+ .text :
+ {
+ /* Startup code must go at address 0 */
+ KEEP(*(.isr_vector))
+
+ *(.text)
+ *(.text.*)
+ *(.gnu.linkonce.t.*)
+ /* these sections for thumb interwork? */
+ *(.glue_7)
+ *(.glue_7t)
+ /* these sections for C++? */
+ *(.gcc_except_table)
+ *(.gcc_except_table.*)
+ *(.ARM.extab*)
+ *(.gnu.linkonce.armextab.*)
+
+ . = ALIGN(4);
+ /* .rodata: constant data */
+ *(.rodata)
+ *(.rodata.*)
+ *(.gnu.linkonce.r.*)
+
+ /* C++ Static constructors/destructors (eabi) */
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __miosix_init_array_start = .;
+ KEEP (*(SORT(.miosix_init_array.*)))
+ KEEP (*(.miosix_init_array))
+ __miosix_init_array_end = .;
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ . = ALIGN(4);
+ KEEP(*(.fini))
+
+ . = ALIGN(4);
+ __fini_array_start = .;
+ KEEP (*(.fini_array))
+ KEEP (*(SORT(.fini_array.*)))
+ __fini_array_end = .;
+
+ /* C++ Static constructors/destructors (elf) */
+ . = ALIGN(4);
+ _ctor_start = .;
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+ _ctor_end = .;
+
+ . = ALIGN(4);
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+ } > flash
+
+ /* .ARM.exidx is sorted, so has to go in its own output section. */
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > flash
+ __exidx_end = .;
+
+ /*
+ * .data section: global variables go to sram, but also store a copy to
+ * flash to initialize them
+ */
+ .data : ALIGN(8)
+ {
+ _data = .;
+ *(.data)
+ *(.data.*)
+ *(.gnu.linkonce.d.*)
+ . = ALIGN(8);
+ _edata = .;
+ } > sram AT > flash
+ _etext = LOADADDR(.data);
+
+ /* .bss section: uninitialized global variables go to sram */
+ _bss_start = .;
+ .bss :
+ {
+ *(.bss)
+ *(.bss.*)
+ *(.gnu.linkonce.b.*)
+ . = ALIGN(8);
+ } > sram
+ _bss_end = .;
+
+ _end = .;
+ PROVIDE(end = .);
+
+ .preserve(NOLOAD) : ALIGN(4)
+ {
+ _preserve_start = .;
+ . = ALIGN(4);
+ *(.preserve);
+ *(.preserve*);
+ . = ALIGN(4);
+ _preserve_end = .;
+ } > bram
+}
diff --git a/miosix/config/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/board_settings.h b/miosix/config/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/board_settings.h
new file mode 100644
index 0000000000000000000000000000000000000000..f963b24bebb2a7fc96ee7a9b0037741f662a6344
--- /dev/null
+++ b/miosix/config/arch/cortexM7_stm32f7/stm32f767zi_automated_antennas/board_settings.h
@@ -0,0 +1,78 @@
+/***************************************************************************
+ * Copyright (C) 2018 by Terraneo Federico *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * As a special exception, if other files instantiate templates or use *
+ * macros or inline functions from this file, or you compile this file *
+ * and link it with other works to produce a work based on this file, *
+ * this file does not by itself cause the resulting work to be covered *
+ * by the GNU General Public License. However the source code for this *
+ * file must still be made available in accordance with the GNU General *
+ * Public License. This exception does not invalidate any other reasons *
+ * why a work based on this file might be covered by the GNU General *
+ * Public License. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, see <http://www.gnu.org/licenses/> *
+ ***************************************************************************/
+
+#pragma once
+
+/**
+ * \internal
+ * Versioning for board_settings.h for out of git tree projects
+ */
+#define BOARD_SETTINGS_VERSION 100
+
+namespace miosix {
+
+/**
+ * \addtogroup Settings
+ * \{
+ */
+
+/// Size of stack for main().
+/// The C standard library is stack-heavy (iprintf requires 1KB)
+const unsigned int MAIN_STACK_SIZE=16*1024;
+
+/// Frequency of tick (in Hz). For the priority scheduler this is also the
+/// context switch frequency
+const unsigned int TICK_FREQ=1000;
+
+///\internal Aux timer run @ 100KHz
+/// Note that since the timer is only 16 bits this imposes a limit on the
+/// burst measurement of 655ms. If due to a pause_kernel() or
+/// disable_interrupts() section a thread runs for more than that time, a wrong
+/// burst value will be measured
+const unsigned int AUX_TIMER_CLOCK=100000;
+const unsigned int AUX_TIMER_MAX=0xffff; ///<\internal Aux timer is 16 bits
+
+/// Serial port
+const unsigned int defaultSerial=1;
+const unsigned int defaultSerialSpeed=115200;
+#define SERIAL_1_DMA
+// #define SERIAL_2_DMA
+// #define SERIAL_3_DMA
+
+// SD card driver
+static const unsigned char sdVoltage=33; //Board powered @ 3.3V
+#define SD_ONE_BIT_DATABUS
+#define SD_SDMMC 1 //Select either SDMMC1 or SDMMC2
+
+/// Analog supply voltage for ADC, DAC, Reset blocks, RCs and PLL
+#define V_DDA_VOLTAGE 3.3f
+
+/**
+ * \}
+ */
+
+} // namespace miosix
diff --git a/miosix/config/boards.cmake b/miosix/config/boards.cmake
index a5eabcd51fe6aab17cd39a03cbea01b4cfca3798..37c9e977d195d7dcda4a8b5d84f0bc972aff8b4a 100644
--- a/miosix/config/boards.cmake
+++ b/miosix/config/boards.cmake
@@ -77,6 +77,7 @@ set(BOARDS
stm32f429zi_skyward_parafoil
stm32f429zi_skyward_rig
stm32f756zg_nucleo
+ stm32f767zi_automated_antennas
stm32f767zi_compute_unit
stm32f767zi_gemini_motor
stm32f767zi_gemini_gs
diff --git a/miosix/config/options.cmake b/miosix/config/options.cmake
index 966a1044829eaab3aa476c016c622c4772391137..def67013a5010a8cbc14130d3f4c423f2627b229 100644
--- a/miosix/config/options.cmake
+++ b/miosix/config/options.cmake
@@ -1185,6 +1185,8 @@ elseif(${OPT_BOARD} STREQUAL stm32f767zi_gemini_motor)
set(ARCH cortexM7_stm32f7)
elseif(${OPT_BOARD} STREQUAL stm32f767zi_gemini_gs)
set(ARCH cortexM7_stm32f7)
+elseif(${OPT_BOARD} STREQUAL stm32f767zi_automated_antennas)
+ set(ARCH cortexM7_stm32f7)
elseif(${OPT_BOARD} STREQUAL stm32f767zi_nucleo)
set(ARCH cortexM7_stm32f7)
elseif(${OPT_BOARD} STREQUAL stm32f767zi_skyward_death_stack_v4)
@@ -3282,6 +3284,48 @@ elseif(${ARCH} STREQUAL cortexM7_stm32f7)
## Select clock frequency (HSE_VALUE is the xtal on board, fixed)
set(CLOCK_FREQ -DHSE_VALUE=25000000 -DSYSCLK_FREQ_216MHz=216000000)
+ ## Select programmer command line
+ ## This is the program that is invoked when the user types
+ ## 'make program'
+ ## The command must provide a way to program the board, or print an
+ ## error message saying that 'make program' is not supported for that
+ ## board.
+ set(PROGRAM_CMDLINE st-flash --reset write "main.bin" 0x8000000)
+ ##-------------------------------------------------------------------------
+ ## BOARD: stm32f767zi_automated_antennas
+ ##
+ elseif(${OPT_BOARD} STREQUAL stm32f767zi_automated_antennas)
+ ## Select appropriate compiler flags for both ASM/C/C++/linker
+ ## Not all stm32f7 have the double precision FPU. Those that only
+ ## support single precision are built as cortex m4
+ set(ARCHOPTS -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16)
+
+ ## Base directory with header files for this board
+ set(BOARD_INC arch/cortexM7_stm32f7/stm32f767zi_automated_antennas)
+
+ ## Select linker script and boot file
+ ## Their path must be relative to the miosix directory.
+ set(BOOT_FILE ${KPATH}/${BOARD_INC}/core/stage_1_boot.cpp)
+ # set(LINKER_SCRIPT ${KPATH}/${BOARD_INC}/stm32_2m+384k_ram.ld)
+ set(LINKER_SCRIPT ${KPATH}/${BOARD_INC}/stm32_2m+16m_xram.ld)
+
+ ## Enables the initialization of the external SDRAM memory
+ set(XRAM -D__ENABLE_XRAM)
+
+ ## Select architecture specific files
+ ## These are the files in arch/<arch name>/<board name>
+ set(ARCH_SRC
+ ${KPATH}/${BOARD_INC}/interfaces-impl/bsp.cpp
+ ${KPATH}/arch/common/drivers/stm32_backup_domain.cpp
+ )
+
+ ## Add a #define to allow querying board name
+ list(APPEND CFLAGS_BASE -D_BOARD_STM32F767ZI_AUTOMATED_ANTENNAS)
+ list(APPEND CXXFLAGS_BASE -D_BOARD_STM32F767ZI_AUTOMATED_ANTENNAS)
+
+ ## Select clock frequency (HSE_VALUE is the xtal on board, fixed)
+ set(CLOCK_FREQ -DHSE_VALUE=25000000 -DSYSCLK_FREQ_216MHz=216000000)
+
## Select programmer command line
## This is the program that is invoked when the user types
## 'make program'