Serial-Communication.md

@@ -13,7 +13,7 @@ When you use functions like _printf()_, _scanf()_, _puts()_, _gets()_ etc... ins
 
 ```cpp
 const unsigned int defaultSerial=1;             //default serial = USART1
-const unsigned int defaultSerialSpeed=19200;    //baudrate
+const unsigned int defaultSerialSpeed=115200;   //baudrate
 const bool defaultSerialFlowctrl=false;         //use rts/cts
 
 #define SERIAL_1_DMA                            //use the DMA
@@ -75,7 +75,7 @@ Once your USB-TTL dongle is attached to the PC, you will need to connect the RX
 
 Then you can open a communication using:
 - **Putty** in Windows: Select the _Session_ tab on the left panel and select _Serial_ as "Connection type". You will need to know the COM port to which the Discovery is attached (you can find it out in _Control Pane > Device Manager_).
-- **GTKTerm** on Linux: _Configuration_ > _Port_ > `/dev/ttyUSB0` and select baudrate (19200 for the default serial). You can also use `screen` or `minicom`.
+- **GTKTerm** on Linux: _Configuration_ > _Port_ > `/dev/ttyUSB0` and select baudrate (115200 for the default serial). You can also use `screen` or `minicom`.
 
 In both cases, you will need to set the correct port and baudrate, and you may need install some drivers for the USB dongle to make things work.